Kaleb
Senior Member
- Joined
- Jan 3, 2010
- Messages
- 272
- Reaction score
- 27
I managed to grab some air solenoid valves on my last trip to the scrapyard. They're mains voltage so I don't want to trifle with them, but I thought one of you, or your mates might have a use for them. Anyway, there's some photos of them here:
http://www.flickr.com/photos/65997274@N02/6010526101/
I've got three 2 position 3 way valves and one 2 position 2 way. They don't leak from the closed ports and all of them have continuity on the solenoid coil.
Ports are 3/8" BSP(NPT is very similar), except for the top ports on the 2p/3 ways which are 1/8".
Valves like these cost over AU$10 on Oz eBay coming from China and Hong Kong, but these are genuine Norgren Martonair, so make an offer! I'm also open to swaps if you prefer.
http://www.flickr.com/photos/65997274@N02/6010526101/
I've got three 2 position 3 way valves and one 2 position 2 way. They don't leak from the closed ports and all of them have continuity on the solenoid coil.
Ports are 3/8" BSP(NPT is very similar), except for the top ports on the 2p/3 ways which are 1/8".
Valves like these cost over AU$10 on Oz eBay coming from China and Hong Kong, but these are genuine Norgren Martonair, so make an offer! I'm also open to swaps if you prefer.