DickDastardly40
Well-Known Member
- Joined
- Oct 23, 2007
- Messages
- 309
- Reaction score
- 0
This is a blatant copy of a post JS put up either here or one of the other sites:
The cross cuts were done with a hacksaw, the taper on the capscrew is 6 deg (which my compound is generaly set to anyway)
It doesn't require too much tightening to grip enough to bring my eccentric straps to thickness
If it looks like there's a lot of overhang it's because I wasn't sure how much I'd need to extend the cuts to get expansion and I didn't want to cut too much off the piece of steel.
Thanks John.
Al
The cross cuts were done with a hacksaw, the taper on the capscrew is 6 deg (which my compound is generaly set to anyway)
It doesn't require too much tightening to grip enough to bring my eccentric straps to thickness
If it looks like there's a lot of overhang it's because I wasn't sure how much I'd need to extend the cuts to get expansion and I didn't want to cut too much off the piece of steel.
Thanks John.
Al