Sshire
Well-Known Member
- Joined
- Jun 29, 2011
- Messages
- 936
- Reaction score
- 259
Bandsaw Laser
I've had this laser line module hanging around the shop for a few months and decided today was the day to make use of it. Dug into the small pieces of aluminum bin and did a COC of a "design."
I got the $15.00 laser line module from Amazon. Ebay probably has them also.
http://www.amazon.com/dp/B00EDN5NB6/?tag=skimlinks_replacement-20
A few hours got it done.
I have it calibrated to the arm-locked-up position. 2-AA batteries in a case with an on-off switch.
The SHCSs on the front are the calibration screws. They just pivot the laser module holder and lock it in place.
I've had this laser line module hanging around the shop for a few months and decided today was the day to make use of it. Dug into the small pieces of aluminum bin and did a COC of a "design."
I got the $15.00 laser line module from Amazon. Ebay probably has them also.
http://www.amazon.com/dp/B00EDN5NB6/?tag=skimlinks_replacement-20
A few hours got it done.
I have it calibrated to the arm-locked-up position. 2-AA batteries in a case with an on-off switch.
The SHCSs on the front are the calibration screws. They just pivot the laser module holder and lock it in place.
Last edited by a moderator: