A sin! (Southbend Lathe)

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It had to be moved out of a basement and the only way to do it was to dissemble it. I had to do that with my mill when I moved it. Anyone that has ever used a lathe could inventory the parts and make sure it's all there. Leaving it disassembled is actually a good thing as the new owner could easily move it and reassemble it in it's new home. A closer inspection would be required before buying and if in good to very good condition I would offer $500 for it.
 

Latest posts

Back
Top