302 cyl Head Blueprint

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Henderlong

New Member
Joined
Nov 9, 2010
Messages
3
Reaction score
0
I need a print for a 302 cyl head. the casting numbers are D08E. But any print for a 302 will be benificial. I really just need the exhaust port face, with all hole locations.
Thanks,
Dave Henderlong
 
Hi Dave,
I'll try and get it for you tomorrow.
gbritnell
 
Do you happen to know the distance between the center of the bolt hole line, and the center of the port hole?
 
It's .405 to the top edge then subtract that from the overall size.
George
 
I should have said it's .405 to the top then subtract that from 1/2 of the overall size.
George
 

Latest posts

Back
Top