Help Support Home Model Engine Machinist Forum:
Mechanicboy
Well-Known Member
- Joined
- Last seen
- Messages
- 931
- Reaction score
- 334
Latest activity Postings About
-
-
Akroyd developed the following: - Induction of air into the cylinder. - Injection of liquid fuel into a heated combustion chamber... -
Mechanicboy reacted to Foketry's post in the thread 18 Cylinders Isotta Fraschini (straight six-cylinder x3 ) with
Like.
Distributor improvements The distributor needed some modifications to keep the spark from jumping from one level to another. The first... -
Mechanicboy replied to the thread What is a Diesel Engine ?.Semi-desel engine is a hot bulb engine who has low compression and using the hot bulb to ignite the fuel.
-
Oil pan casting had some sand pullout due to not enough tamping and not enough sanding of pattern.
-
Cylinder liner 12L14 stock loctited in
-
Piston casting and machine .875 bore with oring
-
Mechanicboy replied to the thread Diesel engine : Kromhout Gardner 4LW 1940.I think you misunderstood me. Also not measure per pump stroke and check quantity. So you have to pump 300 times (300 revolutions on...
-
Mechanicboy replied to the thread Diesel engine : Kromhout Gardner 4LW 1940.Check the timing must be exactly same for each pumps to be sure the each get right timing, since the engine is 4 cylinder then it...
-
Mechanicboy reacted to edholly's post in the thread New 2.5 cc Model Diesel design and build. with Like.
Here is my next edition of the HB - using screw thread everywhere to hold it together and to allow for the muff to be a nice fit on the...
-
Mechanicboy replied to the thread Model Diesel: 32mm bore, 38mm stroke, indirect injection.Nerd1000, ..You can't make perfect fit, let running-in the engine improve the tolerance between the bearings and shafts to a perfect...
-
Mechanicboy reacted to Foketry's post in the thread 18 Cylinders Isotta Fraschini (straight six-cylinder x3 ) with Like.
The 3-level distributor cap, each level for 6 cylinders I copied from an old Ferrari 12-cylinder distributor, 2 levels, each for 6...
-
Mechanicboy reacted to Foketry's post in the thread 18 Cylinders Isotta Fraschini (straight six-cylinder x3 ) with Like.
It will take a lot of setup work to make it work, maybe a few months, but I hope I don't have to go to Rome to the Vatican City for the...
-
Mechanicboy reacted to Foketry's post in the thread 18 Cylinders Isotta Fraschini (straight six-cylinder x3 ) with Like.
The engine is taking shape, I mounted the heads with the exhaust and intake manifolds, all with Viton ORings , resistant up to 180...
-
Mechanicboy replied to the thread 18 Cylinders Isotta Fraschini (straight six-cylinder x3 ).To syncronize the carburettors: Put the 2 mm rod in each carburettors and shut the drums and adjust all linkages. Then remove the rods...
-
Mechanicboy reacted to Foketry's post in the thread 18 Cylinders Isotta Fraschini (straight six-cylinder x3 ) with Like.
Intake manifolds and exhaust manifolds I built the manifolds with brass tube brazed on brass supports to be screwed to the heads. The...
-
-
Loading…
-
Loading…