Popular Mechanics & Popular Science Index

Advertise with us
Shop deals on ebay
Find deals on amazon
Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
cfellows

cfellows

Well-Known Member
Project of the Month Winner
Joined
Aug 25, 2007
Messages
3,890
Reaction score
715
Up until about 5 years ago, I had a collection of about 95% of all issues of Popular Mechanics and Popular Science from 1930 until about 1970. During that time I compiled a computerized index of metal working, wood woodworking, and other stuff I found interesting. Now that most of these old Popular Science and Popular Mechanics are available on http://books.google.com, you might find this attached index useful. It lists all kinds of DIY projects for metal lathes, milling machines, drill presses and all manner of wood working. It also has a fair number of projects for tools, attachments, and fixtures. I used to spend hours thumbing through these old magazines. Many of you probably will too.

Just go to books.google.com, and search for either Popular Mechanics or Popular Science and the year and you should get list of all 12 issues for that year.

Also, during the 1940's and maybe 1950's, Popular Mechanics put out an annual publication of is shop articles called Shop Notes. Again, go to books.google.com and do a search for Popular Mechanics Shop Notes. Once you start through one of these, you won't want to stop until you've looked at all of them

Chuck

Attachments below...

View attachment PopMech_Sci.pdf

View attachment PM-PS Index.xls
 
Thanks Chuck,
I had great collections of these mags too, unfortunately
had to give them away years ago when moving locations.

Isnt that google library a great resource, just looking at the
covers brings back great memories!

Thanks for the indexes

Dave
 
I'm searching for an old issue of Pop Mech, I think, that I remember reading at my grandfather's years ago that had plans for building a small running engine from wood. I think it used Ebony for the piston or crank and ran on 2-stroke mix. I'm guessing it was 50's era vintage. I originally posted on the Home Shop Machinist board and received some nice links to Google Books but I am still not having any luck with my searches. I also tried your indexes.
Does this project sound familiar to anyone? Any help would be appreciated.
Thanks,
SM
 
Great Chuck, is the PDF file a subset of what is listed in the XLS file or it contains different items.

I like to save only the XLS if it list the same PS articles.
 
Chuck, thanks for compiling this list and sharing it. I also had a great collection of PS and PM when I was a kid. I'd scrounged as many issues as I could find from the 30's, 40's & 50's.

I was thinking today about how much I learned back in the 50's from product literature. I collected literature mostly on farm and construction machinery, trucks, and cars as well. There were wonderful cross section drawings of engines and transmissions as well as quite a bit of technical information. I don't think much, if any, of this detail is published anymore.

I believe this collection of magazines and brochures bent me down the path to engineering.

Regards,

Chuck
 
--Slight OT--

"I was thinking today about how much I learned back in the 50's from product literature. I collected literature mostly on farm and construction machinery, trucks, and cars as well. There were wonderful cross section drawings of engines and transmissions as well as quite a bit of technical information. I don't think much, if any, of this detail is published anymore."

I have a friend who is a graphic artist and she collects stuff like this, as well as things from garage and yard sales which come in original packaging from the 1950s and 1960s. She admires the way real information was presented and the fact that the page design could be made very understandable, yet attractive considering the audience expected to read it. Her instructions: "I want anything before they were required to put safety warnings and disclaimers on everything."

I agree that some information today may be less useful than then. I once had to purchase a piece of equipment and I had RFPs out to eight vendors. Only one could provide actual dimensions that would help determine the floor space required and whether it would fit through the door.

--ShopShoe
 
MarshSt said:
I'm searching for an old issue of Pop Mech, I think, that I remember reading at my grandfather's years ago that had plans for building a small running engine from wood. I think it used Ebony for the piston or crank and ran on 2-stroke mix. I'm guessing it was 50's era vintage. I originally posted on the Home Shop Machinist board and received some nice links to Google Books but I am still not having any luck with my searches. I also tried your indexes.
Does this project sound familiar to anyone? Any help would be appreciated.
Thanks,
SM
Click to expand...

Over the years I poured over my collection of PS & PM a lot and I don't remember seeing plans for such an engine. There were also Science & Mechanics and Mechanix Illustrated so it could have been in one of those.

Chuck
 
Chuck,
Thanks for the reply and the info on the other sources. I will give them a try.

SM
 
Hello Chuck Thank you for compiling & posting the indexes. Regards, Earl
 
Thanks, Chuck for compiling this index.
My grandfather had Popular Science from about 1925 to 1970 in his attic. I spent many summers reading them by the stack. This started my interest in building things, fixing things and science and technology. This has all led to careers in Auto Repair, Machine Shop, And Teaching Machine Shop at my local University.
It's a shame that Popular Science and Popular Mechanics are barely a shadow of their former selves now.
cheepo45
 
Yes, for many years I found Popular Mechanics & Popular Science more entertaining than Television. It is a shame to see where these magazines are today.

However, I am happy to see the Maker Movement blossoming. The advent of youtube, blogs, and forums has brought to light many very talented and interesting folks & projects.

Chuck
 
Thank you Chuck for your time and work involved in compiling these. I had an uncle who was a sheet metal worker for 40 years that had a great collection of these books in his garage. They are gone with the wind.

Am so glad you did this and that Google has their references.
 
You must log in or register to reply here.

Similar threads

P
A new lathe
Replies
14
Views
2K
SmithDoor
SmithDoor
Scott_M
Another “Tiny” I.C. My first model engine
2
Replies
35
Views
8K
Scott_M
Scott_M
mayhugh1
1/3 Scale Ford 289 Hi-Po
13 14 15
Replies
287
Views
59K
mayhugh1
mayhugh1
P
Machine tool alignment Part 2
Replies
0
Views
2K
pete
P
Eccentric
Offenhauser Inline 4 cylinder, Might Midget Model Engine Build
2 3 4
Replies
77
Views
24K
peterl95124
P

Latest posts

Back
Top