- Joined
- Jul 16, 2007
- Messages
- 2,987
- Reaction score
- 1,055
This is a heavy copper vertical boiler. All the joints are silver soldered, the heads, flues and ferrules. It is 3.00 diameter with 6.00 of water space. The overall length to the top of the boiler is 13.5 inches. It has 13-.375 diameter flues.
The boiler includes all of the fittings shown, 1.00 dia. pressure gauge, inlet check valve, water gauge with safety stop valves and blow down cock, pressure relief valve, threaded ferrule for steam pipe attachment and whistle. The firebox door opens to see the flame. It was made for a round ceramic burner which I never purchased.
I built this with the idea of making a donkey engine setup but got into IC engines heavily so I'm selling off a lot of my steam pieces.
I would like to get $225.00 for it plus $15.00 shipping.
Pictures will be in several posts.
gbritnell
The boiler includes all of the fittings shown, 1.00 dia. pressure gauge, inlet check valve, water gauge with safety stop valves and blow down cock, pressure relief valve, threaded ferrule for steam pipe attachment and whistle. The firebox door opens to see the flame. It was made for a round ceramic burner which I never purchased.
I built this with the idea of making a donkey engine setup but got into IC engines heavily so I'm selling off a lot of my steam pieces.
I would like to get $225.00 for it plus $15.00 shipping.
Pictures will be in several posts.
gbritnell