Soft Iron Binding Wire

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pandy

New Member
Joined
Dec 26, 2010
Messages
4
Reaction score
0
My first attempt at this so I hope I am on the right track!

Getting well on with my first project - a v small oscillating engine and now need to purchase a small ammount of soft iron binding wire. I can find it by the ton!! but nothing in small quantities. Also could anybody recomend a source of 20/22g copper tube? I say copper because that is what is recomended and I am not certain weather I could use brass, gun metal, etc.

Could anyone help please.

Pandy

The specified tube is 2½inch 20 or 22 gauge copper

Many thanks to all who replied

Pandy
 
Last edited:
Pandy,
If you are in one of the Plymouth's in the USA then:
http://www.ottofrei.com/store/Iron-Binding-Wire
If you are in the UK or elsewhere then shipping would be to expensive from them, but look for more local jewelry making suppliers. Thats what Ottofrei is.
Gail in NM
 

Latest posts

Back
Top