Scratch built marine engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

doubleboost

Well-Known Member
Joined
Feb 23, 2008
Messages
122
Reaction score
6
SLIDEVALVEVID039.jpg

SLIDEVALVEVID041.jpg

SLIDEVALVEVID040.jpg

STEAMENGINE201007012.jpg

reliefvalve006-1.jpg

 
Wow. Thats a nice looking engine. Fairly large too, what are the specs?

Also... the last picture doesn't look like it goes with the engine in the first couple of pictures... Looks like some kind of kart with a modified engine?? (some type of jet engine maybe?) Is that a blower housing? More details please ;D

Eric
 
Turbo charger for the steam powered cigar boat ;). Jokes aside nice engine, any plans on building a boat to go along with it?
 
That looks very similar to a Hasbrouck #1..

NICE WORK!

Is there a steamboat in your future? ;D

Dave
 
Hi it is based on a hasbruck no 1 .
I am trying to get info on a boiler for it ,i have no room for a boat .But i fancy putting it on my go kart just for fun
Regards
John
 
This link should show it running
[ame]http://www.youtube.com/watch?v=Ib5FmujaJp8[/ame]
 
Ray is a good friend of mine.

Look in " Steamboats and Modern Steam Launches" which is put out by Elliott Bay.

That should help.


Dave
 
John,
That is a beautiful bit of work you have done there.
Something to be really proud of.

John
 
Hi
The kart if fitted with a home built gas turbine (jet) engine .
It developes 50-60 kg of thrust running at 30 psi boost pressure , a small honda petrol engine drives the lubricating oil pump giving 90 psi to the turbine bearings with hot oil this is critical to keep the turbo bearings alive .
The etrol engine also drives the high pressure fuel pump supplying kerrosine at a pressure of 50 / 350 psi the amount of fuel pressure you supply controlls the thrust ,
Running flat out it burns 5 litres per minute (3 tines this with reheat)
The basic unit is built around a large turbocharger fron a earth mover
mt3mk2assembled011.jpg

mt3mk2dash005-1.jpg

mt3mk2dash013.jpg

MT3MK11021.jpg

mt3mk11assembled016.jpg

mt3mk11ftdrilled013.jpg

 
This link should show the unit running in its prototype form
ttp://www.youtube.com/watch?v=y7UJxGmQz84
[ame]http://www.youtube.com/watch?v=ZbE5G-Czbwc[/ame]
[ame]http://www.youtube.com/watch?v=9AyOFxYd7Ms[/ame]
 
Yes I think Nomex quite sums it up ;D

Thats COOL!!!

Who needs a firebox.....just some boiler tubes!

:bow:


Way cool.....thanks for posting that!

Though the contrast of technology interests is very interesting.


Dave

 

Latest posts

Back
Top