stanstocker

Well, the top end is starting to shape up very nicely.

Gentlemen, I made this fixture years ago and have had to use it to make an elbow fitting for the radial engine I'm building. I thought...

I would not go for a GRBL base machine myself, because experimenting with sensors, manual pulse generators (MPG) and things like this is...

The Black Hills show was GREAT! The largest exhibitor turnout in many years. I was really please with the amount of people that drove...

youtube link plus bla bla Well, things I learned from final long term runs. The Hot tube is in direct contact with a...

Well was i surprised to have it running the fist time, i thought i might have to fiddle a little with the valve timing. I still need to...

I did real time stuff back in the 70's and early 80's, most of what was critical then just doesn't apply to small machines in the home...

Mach4 runs for 10 minutes or so then stops allowing motion until it is licensed. Cheers, Stan

hi folks: As a frequent lurker and learning much from the HMEM community I wanted to share this project. Its not exactly a working...

I just finished my version of the Hoglet. Randall was a good friend of mine so this is sort of a tribute to him. It is modified from...

Some more parts.

The parts all still need some fettling with wet & dry, breaking some sharp edges.

Some photos of the parts made thus far.

Hi I started my JH v-twin build in March 2022 and documented my progress on my YouTube channel @learningturningmetal Yesterday I managed...

Hi Krypto. I guess you may be surprised how many have made their own boilers. I have designed and built 6, and repaired or reconstructed...