Scale Hardware is the U.S.'s best source for scale model fasteners.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You can see them in action on the water engine thread. They are securing the flange onto the copper Air Column. The nuts are offered in 3 widths... 5/32 (grossly over sized), 1/8 and what is called "Scale". The "Scale" are quite tiny and look right for our use. Those are the ones shown in the photo.

Steve
 
those look good, I hadn't seen that thread - nice looking engine, I like the attention to detail like flanges to connect piping and the oilers etc. good stuff
 
Back
Top