fallnhorse
Member
- Joined
- Feb 2, 2014
- Messages
- 9
- Reaction score
- 8
Finally it came together. I had to re surface the exhaust seat. Then run 2 psi on propane regulator before the valve. The Original carb and orifice is almost perfect for propane operation only modification i had to close two of the three ports. One port closed it runs lean and two ports close out of three it has a stronger hit.
Wow does it like to run. Excuse the little noise i had an allen wrench touch the flywheel during the video. Wanted to show how nice it runs and how good propane works. I just have to oil the cylinder when done thoroughly.
Hope you enjoy. It's my second engine.
Just have to do the finishing touches
[ame]https://www.youtube.com/watch?v=Sf4UszHWX7o[/ame]
sorry should work now
Wow does it like to run. Excuse the little noise i had an allen wrench touch the flywheel during the video. Wanted to show how nice it runs and how good propane works. I just have to oil the cylinder when done thoroughly.
Hope you enjoy. It's my second engine.
Just have to do the finishing touches
[ame]https://www.youtube.com/watch?v=Sf4UszHWX7o[/ame]
sorry should work now