PatRoVa Rotary Valve engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hello all.


Today the US Patent Office (USPTO) mailed the Issue Notice for a patent granted for the PatATi engine:

PatATi_US_Patent_Issue.gif


More at http://www.pattakon.com/pattakonPatAT.htm and http://www.pattakon.com/pattakonPatATeco.htm

Officially the patent is to be published July 4, 2017.

Thanks
Manolis Pattakos
 
just an idea: 2 stroke operation with reed valve crankcase induction and exhaust in the cylinder head.
the rotary valve ports could be angled to be 'pushed' around by the impinging exhaust gas pressure; in
effect a 'compound' engine configuration. the rotary valve could possibly have multiple ports, resembling
a turbine, putting power into the crankshaft, geared to it with the suitable ratio.
2 stroke cycle operation would resolve lubrication problems (if any) but 4 stroking could also be possible.
I 'feel' your rotary valve architecture offers favourable timing possibilities for timing variations for c. e.
operation. I haven't got the time to fully investigate this idea by 'gedanken' experiment for possible snags
and being computer 'semiliterate' I can't post pictures or drawings but I have not overlooked the main point
of your design; the absence of pressure on the valve. so far the full combustion pressure on the valve negated
all the other r. v. configurations I have noticed.
 

Latest posts

Back
Top