Papplewick Pumping Station UK

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

peatrich

Active Member
Joined
Aug 9, 2012
Messages
36
Reaction score
17
I rode the bike down to this Victorian pumping station, because it was in steam, today. Here are a few pics. There are 6 boilers, three of which are in use at a time. The flywheels are 20ft diameter and weigh 24 tons, the beams 25ft long weigh 13 tons each. The pumping capacity was 1.5m gallons per day. Built by James Watt between 1882 and 1884.
On sight there are also, a 1930 4 stroke diesel generator for a cinema, a couple of single cylinder vertical engines, a 3 cylinder vertical engine and two horizontal steam engines used to operate the winding gear of the local Linby colliery (the last picture)
enjoy
kind regards
Peter

005.jpg


003.jpg


002.jpg


007.jpg


004.jpg


009.jpg
 
They are just so pretty. And, as Lennardhme says, you have so many of them.

Jim
 
Absolutely great photos. Thanks for sharing
 
Back
Top