open crank horizontal drawings

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

grapegro

Well-Known Member
Joined
Jun 28, 2013
Messages
103
Reaction score
7
Hello All,
I am contemplating the build of an old horizontal engine model, gas fired between 100 and 200 rev p/m. Does anyone have knowledge that could help me with mainly combustion chamber and/or valve arrangements. I am looking at building this engine from materials other than castings. Any help would be very welcome.
Norm
 
Hello Jim,
Thanks for that suggestion. What I am aiming to build is more in the line of 1880's to early 1900 engine, Crossley or that style of engine with side shaft. Norm
 
Back
Top