- Joined
- Aug 16, 2013
- Messages
- 1,033
- Reaction score
- 764
Second engine I built. Double acting oscillating engine .5
bore and stroke from plans I downloaded from the internet. I wish I'd kept
better track of where I got them from so I could give proper accreditation.
The head was to be silver soldered cylinder but I chickened
out and used Loctite 620 Sleeve Retainer. This was my first attempt using Loctite,
they say it's good to 200 deg C/ 400 F and it hasn't blown off yet (under light
steam
bore and stroke from plans I downloaded from the internet. I wish I'd kept
better track of where I got them from so I could give proper accreditation.
The head was to be silver soldered cylinder but I chickened
out and used Loctite 620 Sleeve Retainer. This was my first attempt using Loctite,
they say it's good to 200 deg C/ 400 F and it hasn't blown off yet (under light
steam