Mill Quill and thinking things through

Help Support HMEM:

DJoksch

Well-Known Member
Joined
Feb 21, 2021
Messages
55
Reaction score
14
Location
Yuba City
This Engin mill was buried in my parents shop missing the motor and quill since the 70’s. It was bought at a sealed bid school auction and the quill and motor we’re missing when it was picked up. I built a quill to take an R8 collet, but missed the length by a full inch. I will correct this when I tear it down for paint. It actually works nicely.
 

Attachments

DJoksch

Well-Known Member
Joined
Feb 21, 2021
Messages
55
Reaction score
14
Location
Yuba City
I’m just getting to it. I am starting with the table and replacing the cross feed screws. It suffered much High School shop abuse. Luckily the table itself is tight.
 

Latest posts

Top