tel
Well-Known Member
- Joined
- Feb 8, 2008
- Messages
- 3,293
- Reaction score
- 44
This topic came up not so long ago, and as I am up to making the strap for the Ridley half beam, I though it might be timely to post a few 'how I do it' pics
First cut a big-enough piece from the parent stock, in this case 5mm brass, 20 mm wide
Then mill the long edges straight and square.
.... and do likewise on a small section of one end, for indicating purposes
First cut a big-enough piece from the parent stock, in this case 5mm brass, 20 mm wide
Then mill the long edges straight and square.
.... and do likewise on a small section of one end, for indicating purposes