Help.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

David Sheard

New Member
Joined
May 19, 2020
Messages
3
Reaction score
0
Location
Aberdeenshire Scotland
I inherited this from my farther some years ago and have no idea what model it is as the drawings were misplaced. It was built around 1980 but did not have the piston/valve chest machined correctly (no holes between the valve and piston. My job is to get it running so can any one help with drawings of the machining that has to be done.
20200519_091711.jpg
20200519_091658.jpg
20200519_091758.jpg
 

Latest posts

Back
Top