Help required with threading inserts

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Pat,

Thanks for the info, but I have been single point threading for around 50 years and cutting with carbide for the last 20, so I think I might have mastered it by now.

One thing I have noticed though, the tips are ground edged rather than moulded, so they should cut like HSS, and I will try that method first.


John
 
I was asked by phone yesterday about how I am getting on with this project and I have actually sorted things out. These are the items that I purchased from several suppliers to get me set up with the 16mm sized tips and rather beefy holders. Smaller sized holders can be easily obtained, they just need a bit of searching for.
The whole lot came to around 100 UK pounds.

Inserts

http://cgi.ebay.co.uk/ws/eBayISAPI....22299234604&view=all&tid=1717960388011http://

http://www.ebay.co.uk/itm/381736799725?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

http://www.ebay.co.uk/itm/162361476658?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

http://www.ebay.co.uk/itm/152432821796?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT


Holders

https://www.aliexpress.com/item/FRE...32604791140.html?spm=2114.13010608.0.0.RAymZG

https://www.aliexpress.com/item/SER...32623082057.html?spm=2114.13010608.0.0.RAymZG

http://www.banggood.com/SNR0013M16-...16IR-AG60-Insert-p-1081550.html?rmmds=myorder

The smaller 11mm ones are approximately the same price.

So, when all these eventually arrive, I should be set up for single point threading for the rest of my time.

Hope this helps

John
 
Sadly every time I see this thread's title I think Heli-Coils, Time-Serts and the like. I've entered into this thread at least 3 times thinking we have a Heli-Coil discussion going.
 
Baz,
Maybe I should have used the title 'Help required with replaceable tungsten tip screw cutting threading inserts'

But as usual, brain not engaged before raising the topic, but for my defence, I can't think of everything that other people might think of ;).

John


 
Back
Top