Crucible camera pouring cast iron.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

100model

Well-Known Member
Joined
Nov 7, 2012
Messages
206
Reaction score
191
Location
Victoria Australia
Hi everyone.
I have always wanted to mount a camera on my pouring trolley but because getting someone with good camera skills when I need them can be difficult. It turned out so well I wished I had done this a lot earlier. Really great results can be expected using cheap green sand, the plaques came out excellent in cast iron. Have a look at the video. https://youtu.be/fQ4nw_KTyEM
 
Very well done, it looks like you have quite a bit of experience with pouring cast iron. On my to do list eventually at the cottage where there is space and far neighbors. The city isn't conducive to casting unfortunately...

I do have a question - what type of crucible are you using? I apologize if it was mentioned in the video but I skimmed through it a bit...

Mike
 
Back
Top