B
Bogstandard
Guest
I am just spraying up an engine using a commercial can of paint of a type I have never used before.
After about the fourth thin coat a bit of wind or cold air must have hit the parts and a few of them have bloomed in places. This was on what I hoped was the final finish coat. I left the recoating time to double what was recommended because of the cooler temperatures.
If I leave it to dry thoroughly will I be able to polish off the bloom, overspray it again, or is it a strip off and start again job?
John
After about the fourth thin coat a bit of wind or cold air must have hit the parts and a few of them have bloomed in places. This was on what I hoped was the final finish coat. I left the recoating time to double what was recommended because of the cooler temperatures.
If I leave it to dry thoroughly will I be able to polish off the bloom, overspray it again, or is it a strip off and start again job?
John