raym 11
Well-Known Member
- Joined
- Jul 21, 2007
- Messages
- 147
- Reaction score
- 0
the Keats Block reminded me of one I made from a Guy Lutard design. I think he called it a finger block. I used Class 40 Cast Iron and polished it.
It canbe used on the bench, in a vise, or clamped to a machine table. Dims. ~31/2x31/2x1. The pic. shows it holding the camshaft for my upshure twin.
This submittal probably belongs under the "tools" column.
Moved to the tools section. Admin
It canbe used on the bench, in a vise, or clamped to a machine table. Dims. ~31/2x31/2x1. The pic. shows it holding the camshaft for my upshure twin.
This submittal probably belongs under the "tools" column.
Moved to the tools section. Admin