4x6 Bandsaw mini-table plan

[DICKEYBIRD]

I've had one of the 4x6 H/V bandsaws for a couple years now and find myself using it in the vertical mode a lot. I didn't like the mickey mouse sheet metal table that comes with it so I made one from 1/4" plate. It's sized small enough so it doesn't have to be taken off to use it in the horizontal mode. A handy feature, eh?

I attached a .jpg with the dimensions if anyone else wants to make one.

Milton

 

[shred]

I made one very similar-- it's got a little more space off to the left, but needs a cut off corner to get there and puts the saw slot in front. It's a very handy and easy mod.

Here's the PDF and DXF

http://www.shred2.net/~shred/miscimages/4x6Table-Layout.pdf
http://www.shred2.net/~shred/miscimages/4x6Table-annot.dxf

 

[Kermit]

Raising the Dead.

To Whom it may concern.
I'll be co-opting this idea to go with the motor capacitor I must replace to get my 4x6 running.

Thank you. Both.