Help Support Home Model Engine Machinist Forum:
ChazzC
- Messages
- 135
- Reaction score
- 42
Latest activity Postings About
-
-
ChazzC replied to the thread How Do You Make Tiny Copper Washer Gaskets?.I like using card stock (get a lot of it in the mail, and no one locally will take it for recycling): it's easy to use a glue stick to... -
ChazzC replied to the thread How Do You Make Tiny Copper Washer Gaskets?.I have a set of (reasonably) heavy-duty paper punches that I frequently use for making small holes in thin sheet brass/copper/plastic...
-
-
ChazzC reacted to Steamchick's post in the thread How Do You Make Tiny Copper Washer Gaskets? with
Like.
And there was I simply buying packs of 20... http://www.blackgates.co.uk/body_catalogue.html I'm sure there are better things to make... -
ChazzC replied to the thread What have you been doing today?.Teflon spray works well, just need to let it dry before shoveling. (dupont also markets a Teflon Snow and Ice Repellant, but it looks &...
-
No hands on experience, but that's a whole lot of money for one of those mini lathes. Ok as the advertising says it has "true" inch...
-
ChazzC replied to the thread MicroLux Lathe.I have had mine for close to 10 years snd have been happy with its performance. It is on par with the Little Machine Shop lathes, and...
-
https://www.guhring.com/Support/Technical/Tap-Drill-Sizes Above is one of the best tap charts that I have found. If you spend some...
-
ChazzC replied to the thread What have you been doing today?.5” (or double that to be at the top of your blade?) isn’t a lot of snowfall. Although we’ve be lucky this year, we have had single storm...
-
ChazzC replied to the thread Bought a new shop stool today---.Very nice, Brian. I always have problems with 4-footed furniture in getting the legs in a single plain (in factories where they work in...
-
And there we have my finished shop stool. Right height and right foot-rung height. Only problem I had was running out of mig wire half...
-
ChazzC replied to the thread Selection of Steel to use.I get most of my 12L14 stock from Oakland Steel on eBay (SteelDawg9061); they have good prices, will combine shipping (it's amazing what...
-
-
ChazzC replied to the thread Selection of Steel to use.I’ve had good results cold bluing 12L14, cleaning with detergent & Acetone, then warming the parts prior to submerging in the cold blue...
-
ChazzC replied to the thread Press Fits.Our Design Team, who did the bulk of the detailed work in Revit (as opposed to the Engineers, Architects and PM's like me who only used...
-
-
I give up
-
ChazzC replied to the thread What have you been doing today?.Unless a change in the law is pushed through.
-
-
Loading…
-
Loading…
