Latest activity
Help Support Home Model Engine Machinist Forum:
-
Thanks gb... I simply sat down and worked out what I needed to do from the evidence - Black plugs mis-firing within 20 miles of being... -
A few notes from the Baker 1912 catalog. Interesting to note that the engine could be configured to operate on either alchohol (larger...
-
When I built my 302 V-8 engine I played around with several different designs and sizes of carburetors. What I settled on was, at the...
-
Klrskies replied to the thread Carb talk for Beginners.In the early 80's the world was evolving into fuel injection. My 1983 VW GTI had a mechanical air flow meter before the throttle body...
-
Jasonb replied to the thread Carb talk for Beginners.You don't actually need the classic taper in- taper out shape. The end of the gas inlet protruding into the air inlet will reduce the... -
Super results! My compliments! You definately got the casting part going on exceptionally. It is always rewarding to not have to make... -
OI should have been working on the crankshaft but I had to do some casting to do for my partners grandson so I decided to try my intended...
-
OOlli-Matti replied to the thread 1/4 scale Anzani Fan Engine.Super results! My compliments! You definately got the casting part going on exceptionally. It is always rewarding to not have to make...
-
gbritnell replied to the thread Carb talk for Beginners.When I built my 302 V-8 engine I played around with several different designs and sizes of carburetors. What I settled on was, at the... -
-
Brian Rupnow replied to the thread Upshur's opposed twin engine.And to end off the day in style, we have four valve guides machined and installed. This is going to be the first time I have built an... -
GGRAUBELE replied to the thread Carb talk for Beginners.Here just as an example, the carburetor from the 103 years old Amanco Hired Man (hit & miss engine). Very simple, a check valve in the...
-
-
A few notes from the Baker 1912 catalog. Interesting to note that the engine could be configured to operate on either alchohol (larger... -
GreenTwin replied to the thread Carb talk for Beginners.A few notes from the Baker 1912 catalog. Interesting to note that the engine could be configured to operate on either alchohol (larger... -
-
Jonathan Coates replied to the thread Stuart S50, my first engine build.The 1-2-3 block idea is thanks to JasonB who suggested it in my angle plate build post, thanks Jason for the great idea. -
Jonathan Coates replied to the thread DRO uses with conventional drawings.Thank you, this will be on my wall tomorrow morning. I'll need it for my Stuart build translations and when I'm not there I'm sure the...
