Tailstock DRO for Weiss WBL250F

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Dec 27, 2020
Messages
28
Reaction score
38
Location
Arizona, USA
I added a DRO to the tailstock of my lathe primarily because I had trouble reading the graduations on the ram.

Consists of 3ea 3D printed parts and some M3 SHCS.

I posted the files on thingiverse.com.

https://www.thingiverse.com/thing:6159891
Seems to do the trick. Just installed it last night, so early days yet.

I will shorten the scale when I confirm that there are no other issues......
 

Attachments

  • Screenshot 2023-08-07 115151.jpg
    Screenshot 2023-08-07 115151.jpg
    35.7 KB · Views: 13
  • Tailstock DRO.jpg
    Tailstock DRO.jpg
    1.4 MB · Views: 2
Back
Top