• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Simplex4 cyl kit on Ebay

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That seems a little pricey for just castings.... But don't know if they are available anywhere else.

Chuck
 
Looks like a very nice top end casting set. Good detail. Expensive, but worth it to the right person.
 
The Simplex casting set was made by Eric in Fairbanks a few years ago. Only a handfull were produced and the detail is very good. The manifold was investment cast using a soluble core in the wax so it could be made hollow around the curves. The flywheel wax was cast in a very complex mold, made by C. Stark, with removable pieces to get the fan blades at the correct angle. No effort was spared to make this a special engine. It was a bargain for someone wanting a rare and unusual engine.

Roland
 
Back
Top