New Wind Engine

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Feliks

Well-Known Member
Joined
May 6, 2010
Messages
144
Reaction score
48
New Wind Engine :


Here the newest model of the wind my car .. Only cosmetic changes on the outside .. :)

newmodel.jpg


But inside the revolution ..
I present two screenshots of the simulator NASA airfoil and it is clear that at different angle of attack with a symmetrical profile, receive different values ??of lift .. From negative to positive .. or 160 KG positive, or 160 kg (320 lbs) negative (downward pushing sash) when changing the angle of attack of 30 degrees .. and dimensions of the wings 2, 5 meters square at a speed of 100 km / h (60 miles)

foilplus.jpg



foilminus.jpg


Well, this wing of their forces can drive the crankshaft directly ..
Here, the animation .. The angle of attack of the wing can change either electrically or mechanically (cam) There is no need for this high energy ..

https://youtu.be/evC5y0wgOVM
[ame]https://www.youtube.com/watch?v=evC5y0wgOVM&feature=youtu.be[/ame]

Well needless to say that such a system also can work at creating their own wind ... ..

I had to publish it on Santa Claus, but that the climate summit a little hurried me .. Because after what happened there in May too tired and negotiate, as you no longer need .. maybe someone out there will send a telegram?:rolleyes:


Andrew:)
 
Well, maybe you need to start from the simple structure ... Here a tandem bike in which the other in the rear never laze will not be ....
The experience you need to slowly gather .. the Wright brothers' first flight at the time, only 278 meters flew his machine ..

Wingtandem.jpg


Andrew:cool:
 
Felix, do you intend building a model of this machine. ?
 
Felix, do you intend building a model of this machine. ?

No, I did not have any model ..Nie allows me to health and conditions, funding .. I can not even finish the previously-started .. But here poto it publishes that everyone can do it .. Of course those who can ..and I would be very grateful for some well-functioning model .. enough ZEW small scale can not be .. it's a bit like the very small model planes fly .. well .. not necessarily think of etaki model bicycle is a good size .. wing with a symmetrical profile should have about 2 meters square surface and the ability to select the grained gear .. I'm looking at the pictures ..
The Wright brothers flew the first flight only 700 meters,,:)

Andrew
 
Last edited:
2 metres square surface ?? This is the Home MODEL Engine Machinist site. I think perhaps you are better of on one of the other sites that cater for larger machines.
 
2 metres square surface ?? This is the Home MODEL Engine Machinist site. I think perhaps you are better of on one of the other sites that cater for larger machines.

Do well to model this engine can be at home .. you can see here, and with the small dimensions of the aerodynamic forces acting. However, you need to think well of the low friction, lest model can work at blowing a hairdryer ..

[ame]https://www.youtube.com/watch?v=F20Rirxu1J4[/ame]

Andrew:)
 
Back
Top