I had this posted in "the Break room under John's humor post but they said I should put in the Tool Section so here it is,
It's my version of a $14 DRO. I was setting up to drill the very crucially placed holes for the base plate of my Elbow Engine and I used my $14 digital calipers, my magnetic based dial indicator holder, two C clamps and a piece of 2X2 square tubing and a wood clamp. It actually worked so well that Im going to rig up a better method to use the Digital Calipers for this on both X and Y. :roll:
Mel
It's my version of a $14 DRO. I was setting up to drill the very crucially placed holes for the base plate of my Elbow Engine and I used my $14 digital calipers, my magnetic based dial indicator holder, two C clamps and a piece of 2X2 square tubing and a wood clamp. It actually worked so well that Im going to rig up a better method to use the Digital Calipers for this on both X and Y. :roll:
Mel