T troll Member Joined Jun 27, 2010 Messages 21 Reaction score 0 Feb 19, 2011 #1 hello Tool Post Stud & Nut for ML7 Is 7/16" - 18TPI ? Thank you
S steamer Well-Known Member Joined Nov 30, 2007 Messages 5,388 Reaction score 29 Feb 19, 2011 #2 I don't know, but Measure the OD and then put a scale up to the threads and count the threads per inch always works for me. Dave
I don't know, but Measure the OD and then put a scale up to the threads and count the threads per inch always works for me. Dave
J John11668 Member Joined Mar 30, 2010 Messages 18 Reaction score 0 Feb 19, 2011 #3 7/16 BSF is 18tpi what is the angle http://homepages.tesco.net/~A10bsa/bsfgo.htm A good engineers merchants should have nuts to fit it Maybe even long nuts
7/16 BSF is 18tpi what is the angle http://homepages.tesco.net/~A10bsa/bsfgo.htm A good engineers merchants should have nuts to fit it Maybe even long nuts
T troll Member Joined Jun 27, 2010 Messages 21 Reaction score 0 Feb 19, 2011 #4 Thank you The lathe does not have it in house. I cannot measure the post stud. Not it wise BSF. repeat thank you
Thank you The lathe does not have it in house. I cannot measure the post stud. Not it wise BSF. repeat thank you