broken screw

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dethrow55

Well-Known Member
Joined
Dec 23, 2015
Messages
136
Reaction score
26
Location
texas
hello all picked up a kafer 2" dial indicator. great dial indicator but the small stop screw broke off in the rear of the stem inside any ideas how to remove it?:fan:
 
Try taking a sharp scribe and turning the stump out, might not have been too tight to start.

hello i used a sharp sewing needle and a jewelers loupe and backed the screw out thanks for your advice.
 

Latest posts

Back
Top