rickharris
Well-Known Member
- Joined
- Jan 19, 2008
- Messages
- 313
- Reaction score
- 0
Hello, We have now managed after much time and effort to complete (we think) the 3D CAD exercise we started oh BS's PDF documentation for his open column twin.
We offer the DXF files here for others to use BUT please be aware nothing has as yet been made from these drawings. The 3D CAD animation seems to work so they should be OK.
Also be aware that some of the work was done by 14 - 15 years old school kids. We have tried to maintain good quality control.
I do note that we inadvertently reversed one of the valve fittings and I am unable to flip it until I get back to school - bear this in mind if you make them.
If this works we will use some other plans we have for further 3D design exercises and post the DXF files accordingly.
Many thanks to John for the original PDF documentation.
View attachment componant sheet 1.dxf
We offer the DXF files here for others to use BUT please be aware nothing has as yet been made from these drawings. The 3D CAD animation seems to work so they should be OK.
Also be aware that some of the work was done by 14 - 15 years old school kids. We have tried to maintain good quality control.
I do note that we inadvertently reversed one of the valve fittings and I am unable to flip it until I get back to school - bear this in mind if you make them.
If this works we will use some other plans we have for further 3D design exercises and post the DXF files accordingly.
Many thanks to John for the original PDF documentation.
View attachment componant sheet 1.dxf