user 48634
Member
- Joined
- Mar 18, 2022
- Messages
- 20
- Reaction score
- 3
I've converted my Grizzly G0781 to CNC. Now, I want to control it from my office by means of Bluetooth. I've attempted to set this up using an Arduino UNO and either a RN-42 or HC-06 BT module. My plan is to use gSender on my Windows 11 PC to control the machine replacing the USB cable with BT.
There is a lot of information related to this on the Internet and I have tried a lot of it but no luck. The problem mainly is communicating from my PC to the BT module. The W11 BT settings are confusing and seem to have a mind of their own. gSender connects with the BT com port (com 12) but none of the controls work.
Anyone out there had success with this kind of thing?
There is a lot of information related to this on the Internet and I have tried a lot of it but no luck. The problem mainly is communicating from my PC to the BT module. The W11 BT settings are confusing and seem to have a mind of their own. gSender connects with the BT com port (com 12) but none of the controls work.
Anyone out there had success with this kind of thing?
