1931 SouthBend 8x36 (24" between centers)

[ironman]

Does any one know anything personally about the Southbend 1931 year 8 X 36 metal lathe, which is 24 inches between centers? I have looked at Lathes, UK and from what I comprehend it is their cheaper lathe with smaller Morse Tapers (#2 on headstock and #1 on tailstock.

I found one local for 500 bucks but now not sure if it is worht that. Triple owner, 2d guy had it about 60 years.

Any feedback appreciated.

ironman (Ray)

 

[BillTodd]

Have you checked Steve Wells site? www.wswells.com/ (unfortunately appears to be down ATM) or checked on the Practical machinists SouthBend forum.

Bill

 

[Allthumbz]

Another place to check is the yahoo Southbend group. They have a couple of guys there that will know for sure.

Best,

Nelson
***************.com