Recent content by Edwin

Hello thanks for the help. Nevertheless, thus I get further a little. This morning I have continued again a little in my locomotive. Now, nevertheless, for the kettle I have turned off 33 mm of brass pipe from brass 63. This is also not especially good by his softy Tenaciously to work on...

Today I have milled with my CNC Mill from 1 mm of brass metal the Running plate and both Frames. Would be of that I could still do both buffers Beams. Today thus I could already screw together the base of the chassis of the small locomotive. Further I do another time

Hello Shred, thanks for the offer. I would have a question. I lack to the plan 3 sides view. Is there such a thing? Thanks Edwin

Hello, yesterday my friend Imanuel has brought me with the search for a new project on a small and easy Dampflock. The Cracker Steam Train for track 1. An easy, but metrical bemaster plan in addition, only unfortunately, with a very small picture as a whole view is to be found here. http...

Hello, on the week end I have been founded a small Rocking engine and, besides, a mistake has happened to me. Because the piston is only one thin disc and forms with the piston rod a unity, the connecting rod bolt is led by a small drilling at the end of this piston. The gudgeon pins with...

Hello Bill, Hello Andrew, Hallo Arnold, I do such small projects the fun always sometimes again, also to find an easy successful experience between complicated and longer needing projects. I plan and build for one year on a Chrampton express passenger locomotive for track 1 in live steam and...

Hello, i have built this week-end to my change simply sometimes again a little bit easy and small. After I I here more and more by the contributions read I have bumped into the Rocking Enginge which I liked very much. Thus I have converted them into metrical mass and this week-end allow to...

After coarse cutting I work on the wick still with my small gas burner which melts the points and I can cut thus everything cleanly. My fourth thermo akustik-Stirling is ready with it and already runs perfect. Edwin

So and today I finish him. Today I have looked to me at the oval brass pipe over again and for me decided not to use it as a distiller, because it would be simply too massive. Thus I have turned once again a sewage pipe about a wooden thorn and have polished the chrome layer. For the ground...

For such fine works I have been founded before short a small milling and drill. Now the ready joint with the piston looks screwed together thus. I do the connecting rod from two brass sticks I once with a 2 mm and a 4 mm of hole provides. I connect this with a high-grade steel the flat steel...

Afterwards I bore 1.6 mm of hole concentric by the later joint, and drills out it up to middle on 2 mm. Now thus I can saw in the same connection with a saw blade a 2 mm wide slit and cut a M2 of thread in one half of the drilling. I turn up the connecting rod bolt with my watchmaker's center...

I have done the working cylinder and piston from a glass syringe which I have bought at an auction in Ebay. In order to fasten in the brass shell I wrap him in several positions Teflonband, in such a way that I can push him carefully, but firmly in this. The joint screw connection to the...

Hi, today I have further built a little on my Stirling. First I have begun with the camp shell from brass. Two ball bearings with 13 mm are pressed in in a distance of 20 mm to this. To the ball bearings I have removed the deck discs and with benzine have removed the fat. After him blow out...

Hi MB, a really perfectly running engine. There I become really envious. Now only the suitable impulse model is absent in addition. A washing machine, for example. Edwin

Hello Mike, Thanks for your praise. There is not a plan in the sense of these thermo akustik Stirling, indeed, a good description on a homepage, indeed, into German what should be, however, with translator programm no obstacle. http://www.w-haag.de/ Edwin