Stuart Sirius

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AN5523

Active Member
Joined
Oct 19, 2019
Messages
30
Reaction score
50
Location
Germany
Here some picture of the last build Stuard Sirius steam motor.
It was build of a set of castings from Stuart.


Height 6 Inches.
Discwheel Diameter 2 11/16 Inches.
Cylinder Bore 1 Inch Diameter.
Cylinder Stroke 1 Inch.

Greetings
an5523
 
Last edited:
Back
Top