Russell Grader

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Oldmechthings

Well-Known Member
Joined
Jan 10, 2008
Messages
153
Reaction score
12
We were watching the Antique Road Show on TV and some fellow had brought in a little horse drawn road grader. It had been a salesman's sample of an Adams road grader. I was quite intrigued with it and thought that would be something interesting to build a model of. My dad had an Adams grader to smooth the roads on the farm, but the farm had been sold and besides it was a hundred miles away. I did have a book about Russell Graders, so I picked one of those to model. According to the book their "Highway Patrol No. 2" was their most popular model, although perhaps not their biggest or best. It probably suited more clients needs. There were a couple photographs plus a list of specifications, which was very helpful in getting started sizing it. My model was built 1/10th scale. Same as the hay press and manure spreader.

P2230001.jpg


P2230002.jpg


It was so tiny that I put the lettering on freehand with a little brush. The angle frame was made by splitting 1/16" wall square tubing and then milling the legs of the angle to size. The seat was pounded out on a bench block, and the holes punched with a slotting punch made from tool steel, on the end grain of a scrap of hard wood.
Oh, I also need to mention that Russell was an aggressive company, and kept upgrading, redesigning and experimenting, using tractors etc. for power. This did not go on unnoticed. In 1928 Caterpillar Company acquired the Russell Company. So when you see one of those big old Caterpillar graders going down the road, remember the little horse drawn Russell grader was it's predecessor.
Birk
 
I had a chance to touch this on our last visit. It's a neat model. I was really impressed with the detail of the wheels. The hubs are turned and then the decorative web on the outside was milled. Also notice the rim. Birk showed me a little ring roller with custom dies to make the rims. These would liik great on a model tractor. Great work Birk!!!

Thanks again for sharing, Wes
 
Very impressive model, I've seen a few of these 'in the flesh' and it looks good, down to the shaft and double trees - rigged for a team of 4?
 
Back
Top