Elmer's Una-Flow engine (nr. 48?)

[kc5ezc]

MJP, asked which issue had a copy of the subject engine. I am happy to report that Modeltec March 1990, page 20 has the plans.
He asked for a couple more of Elmer's engines, but I have not found them yet.
Contact info is in my profile if further info is needed.
John

 

[rake60]

Try this link John.

http://www.john-tom.com/html/ElmersEngines.html

Rick

 

[deverett]

For details of Elmer's Engines, look at

http://groups.yahoo.com/group/Elmers_Engines_1/?yguid=133995445

There are 4 yahoo groups, but to see the contents you will have to sign up.

Dave
The Emerald Isle

 

[kc5ezc]

Thanks for the information guys. I was responding to a member who asked if the una-flow engine was in
Modeltec. I am a member of the yahoo group and also have the issue of modeltec listed. I appreciate your help.
Just looked again and the query was posted in 2007. So Mjp or whatever may not still be around to get these messages.
I still have a bunch of old modeltecs mags to go thru and see if the other two engines he was interested in are there.
Thanks again.
John Burchett
in byng OK