Anilam wizzard 112 DRO

Shop deals on ebay
Advertise with us
Find deals on amazon
Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
M

MRA

Well-Known Member
Joined
Feb 13, 2012
Messages
344
Reaction score
115
Hi Folks
I have acquired an ancient Anilam wizzard 112 DRO, which looks like this

http://www.practicalmachinist.com/vb/general/need-manual-anilam-wizard-dro-205940/

Like the person who posted that picture originally, I need a manual, and the web suggests I am not going to find one. Specifically, I need a schematic for the power supply (which has blown up) or failing that if anyone has one and is prepared to measure 3 or 4 voltages coming off the PSU and onto the logic boards, I would be very grateful. The ac voltages of the three secondary transformer taps would also be very helpful.

cheers
Mark
 
http://www.machinemanuals.co.uk/manual.php?p=189

Claims to be the manual for the Anilam Wizzard £9.95. Never bought anything from them so don't know what the quality is like.

Just bought a manual for the Dormer 108 drill grinder from them they are quick to take your money but once they have there is no download link. The phone goes to the fax. I have e-mailed them about it. Could be a problem on the website could be fraudulent we will see.
 
Last edited:
Thanks Richard. 'Wizard' was a name Anilam used on a long range of DROs - mine seems to be one of the first. Well, let us know how you get on with that firm. Meanwhile I have sussed that the logic boards need -12v, +5v and +6v (and I know where!) so I can fudge that with a lab power supply and see if it lights up / what the current consumption is. I guess I might be able to make a power supply after that. Since there's no info around on these, I'll post back here on it.
 
Years ago where I work they bought a floor mill with Anilam dro's. After several service calls they junked them. May not be worth fixing. They weren't all that accurate when they did work.
 
I rang them. He apologised and sent me a link to MyAirBridge which downloaded just fine. The manual is a good clean scan of the original and cheaper than anywhere else I have found on the web. So it would seem they are worth dealing with if they have the manuals you need.
 
You must log in or register to reply here.

Similar threads

Steamchick
Unimat SL lathe motor conversion.
2
Replies
38
Views
11K
ddmckee54
D
74Sprint
Universal small engine ignition & Science
Replies
16
Views
3K
74Sprint
74Sprint
B
Model engine CDI easy and cheap
8 9 10
Replies
191
Views
61K
74Sprint
74Sprint
skyline1
A Mini spot welder from scrap
2
Replies
22
Views
41K
skyline1
skyline1
A
X2 Minimill DC Drive Failure
Replies
9
Views
6K
Troutsqueezer
Troutsqueezer

Latest posts

Back
Top