Recent content by moya034

That is very creative. The only loophole I see is now that she understands how much money is being saved, she'll come up with more projects to do to split the difference.

Amen! People need to learn how to edit the quoted text so only the relevant quote is displayed.

Imgur.com is much better then photobucket. Make the switch, you'll be happy.

The only way to really learn casting is to start making mistakes and figuring out how to correct them.

I'm curious how the machine made it off the pallet jack and on to the floor. I'm also curious what it costs to hire someone for a job like that.

If I wanted to completely remove it from a surface I'd take a hair drier to warm it a bit, wipe it off with a rag, then clean up with kerosene or mineral spirits.

The way I look at it, there are many things you can do to a machine that probably won't hurt it but you never know what the cumulative effect is. Being that we don't run production shops, you may very well never see an ill-fated cumulative effect from a certain procedure. I do not claim to be...

All you need is three buttons, start, stop, reverse... as impressive as it looks the control panel is total unecessary, a waste of money, and I would say it detracts from the classic styling of the machine, as well. Leave on the original buttons, and wire them to the VFD, or a magnetic starter...

It took me three years to get my 13" lathe up and running... by no means am I rushing you.

The vari speed heads have a rather complex transmission inside of them to provide speed control. This transmission is engineered to expect input from a motor running at a constant speed and torque. The transmission provides a full range of speeds with infinite control between them. The machine...

The original switches are big industrial switches already mounted to the machine in a convenient spot. The VFD is ideally going to be mounted in a safe spot where oil, coolant, and swarf won't get to it. You don't need a pot since its vari speed. Now if you don't like those switches you can...

The speed should be controlled with the vari-speed head only, not the VFD. In fact, a rotary phase converter should really be be used for this machine instead of a VFD.

I will be very upset if I don't get to see pics of this lathe sitting inside your shop, cleaned up, and making chips.

You should be able to wire the bridgeport switches into the logic control of the VFD for start/stop.

Gus, I really enjoy your work. Particularly because certain things for you are hard to get and you are good at getting the job done despite the circumstances. Also, I'm amazed how fast you work too!