You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
Help Support Home Model Engine Machinist Forum:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
-
-
Bearing Blocks Continued (3):
After milling most the edges, the bearing cap was drilled. Then the block was transfer punched, drilled...
-
Bearing Blocks Continued (2):
After cutting the caps from the blocks. There was more machining and cleaning up to qualify edges:
-
Bearing blocks continued:
Then it was back to the mill.
Much of the time was spent milling edges (both parts at the same time as...
-
Onto the main bearings:
These took several hours to do because there are two of them and the shaft hole positions relative to the...
-
Loading…
-
Loading…