Help Support Home Model Engine Machinist Forum:
-
-
Jeffro replied to the thread What is a Diesel Engine ?.A simple truth. Do you want the horrible smell of diesel fuel in your workshop. If I need to refuel a diesel car I make sure gloves are... -
Petrol/paraffin tractors were very common in the UK. Paraffin is heating oil or kerosene so does not attract the same tax as petrol or...
-
Jeffro replied to the thread What is a Diesel Engine ?.A petrol (gasolene) engine usually atomises the fuel in the intake air (fuel air fine mist) via the carburetor and the spark plug...
-
Jeffro replied to the thread Valve timing.Your picture shows a 180 deg crank which means BOTH pistons are at TDC at the same time. 180 deg firing is not possible. Both...
-
Jeffro replied to the thread Wanted Model generator, castings kit..http://www.cringlemodelengineering.co.uk Darwenguy was posting here but seems to have dropped off. Last seen Dec 10 2022.
-
Jeffro replied to the thread Valve timing.As Bluejets stated, your picture shows both intake valves open at the same time. I have seen a horizontal opposed twin "2 stroke"...
-
Hi all members After finishing my Water cooled Farm Boy engine #663 in 2019 I decided to build a air cooled Farm Boy with a spice jar...
-
Running. Seems it likes about 240 RPM with that amount of heat. I haven't tried messing with displacer timing to see if small changes...
-
This is my recently completed version of the Stuart James Coombes, I just used a Stuart Cylinder casting and fabricated or cut the rest...
-
-
Loading…
-
Loading…
