Recent content by Hilmar

Hi Guys, Are those boring bars or Internal Threading Bars ? Hilmar

Why don't you go to the Gerstner website and look how a chest from the beginning to the end is made . Hil

Hi johnnyo, Thanks for the replay. Have to find a place where to get the black flux in NY State. Hilmar

Johnny O, What is the reason to use some times the white and other times the black flux ? Hilmar

George, You said that you made a cover over the valve ports, did you glued it in or just let it be loose and how thick did you made it? Hilmar

Georg, on the launch engine, I wonder if the castings where original from Stuart Turner. On the print from Stuart the valve cover shows only four screws for hold down ,also the cover has no " S "cast into it. On my castings;" I bought from some one on the web not E Bay" they also lousy...

"1970 Tape bulk eraser " from Radio Shack . Hilmar

jor2daje, buy the jacks with a flat on the threaded side, punch a " D "hole and be done with it. For the nut use a nut driver as shown. Hilmar

""If that wood floor guy has a family, then he will be back at work tomorrow."" And he can sue the Saw Co. and get a Million $. Like some guy did , doing the same thing also installing a floor. See the Saw Stop court decision. Blame the Saw Co. for not protecting him Hilmar

Hi Marv, I used one of these saw blades for the last four or fife Years. But it finely gave up on me. Now I need a new one, the old one was i belief $7.00 or $8.00. The " First Storm " I have not seen in the stores lately. Now I have to go for the one by Home Depot. Different Brand also, but...

See if this group can help you http://finance.groups.yahoo.com/group/8x18Lathe/

For those of you who don't know! In MEW # 176 Harold Hall made a change on the grinding rest. He changed the size of the two arms that connect the lower with the upper part from 8 mm to 3 mm thickness. If you have the thicker ones done thinning them to 3 mm. It makes for better fasten the end...

What is meant by this ? "I own the PLR to this product " Hilmar

I have one and the pulley is Alu and straight. Hilmar

Dave I think we doubled