Help Support Home Model Engine Machinist Forum:
-
-
Dubi reacted to Lloyd-ss's post in the thread How Do You Make Tiny Copper Washer Gaskets? with
Like.
Vietti, Charles, Minh-Thanh, and all. You can get pretty decent results just working with your intuition, experience, and common sense... -
I have heard that the pinholes can be sealed with some material, I think it was epoxy. A better idea is to avoid the pinholes...
-
Dubi replied to the thread Question about lost PLA casting.I was told that if you had pinholes in a casting you could Teflon impregnate to reduce the pin holes. Is this correct? Dubi
-
Are they military-industrial? If so, that's why. If not, just taking enormous profits. No doubt some tools are higher quality than...
-
I thought resin printers would be the wave of the future, but after reading about them, I am not so sure. The resin apparently has a...
-
I have made many kilos of gun metal ( red brass in the US) to the 85-5-5-5 recipe. This is an ideal alloy for steam engine castings. I...
-
Dubi reacted to [email protected]'s post in the thread Today I went to buy a file---and---man--- with Like.
Hello All; I was shown by an old time pattern maker, who was in the foundry industry, the trick to filing aluminum. Take a piece of...
-
Dubi reacted to Brian Rupnow's post in the thread Today I went to buy a file---and---man--- with Like.
I have been struggling along for 14 or 15 years now, using files that I inherited from my father. I actually bought two cheap nasty...
-
Cheers Prop! Remember the number one rule. - "Keep the Hooker happy". (Sorry, non-rugby people may mis-interpret that one). K2
-
Let's not let political fights destroy this group, please halt this discussion, it is out of bounds
-
I drilled holes as small as 0.15 mm (0.006") by holding the drill, which has an enlarged shank, in an ER-16 collet chuck. I don't have...
-
Hi, You mention 'pounce' is that similar to ground pumice that we used in our drawing office in the UK. The system in our drawing...
-
Dubi reacted to Lloyd-ss's post in the thread Searching for a really good book on TIG welding with Like.
Before I retired we started up a project at work (actually, brought it in-house) of making the hydraulic steering gear for the Navy's...
-
-
Loading…
-
Loading…