Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

Badhippie
Reaction score
49

Latest activity Postings About

    • Badhippie
      Badhippie replied to the thread Gatling Gun.
      Lucca Thank you I’ll check it out much appreciated Tom
    • Badhippie
      Badhippie replied to the thread Gatling Gun.
      Yep I won’t mess with them if they are copyrighted. I won’t step on Paul’s toes or his family’s Thanks everyone
    • Badhippie
      Badhippie replied to the thread Gatling Gun.
      Retailer I do not see any copyright information on the print. But it’s also hard to zoom in on it and read it. Very well can you tell...
    • Badhippie
      Badhippie replied to the thread Gatling Gun.
      Mark You say it’s fragile may I ask in what way what is giving the problems??
    • Badhippie
      Badhippie replied to the thread Gatling Gun.
      Mark I completely understand I did not know they were copyrighted. I have heard from others they were not copyrighted. Are you willing...
    • Badhippie
      Badhippie replied to the thread Gatling Gun.
      Do you still have plans for the gat Hello Do you still have a set of plans for the RG-G gun if you do would you be willing to sell a...
    • Badhippie
      Badhippie replied to the thread Milling Vise Recommendations.
      Wilton makes a decent milling vise. I have 2 6 inch Kurt’s and yes they are one of the better ones out there but if you don’t want to...
    • Badhippie
      Try wrapping some aluminum foil around the pump controller this is a sure way to tell if it’s EMI causing the problem
    • Badhippie
      One other thing to mention it sounds like a dumb question but it’s really not. Are you sure your water pump is turning the right...
    • Badhippie
      Not only does filling the radiator from the bottom help reduce air locks in the cooling system (if the system is plumbed correctly) By...
    • Badhippie
      Question for everyone wouldn’t it be easier to scribe a line from the center of the part to the centerline of the holes. Around the...
    • Badhippie
      Badhippie replied to the thread V-TWIN---MAYBE V-4.
      Brian She looks like it’s ready run very nice build Good luck Tom
    • Badhippie
      Badhippie replied to the thread IPhone and working with metal..
      Keep you phone in a zip lock bag this keep you phone clean and most of the time you can still use your phone inside the bag
    • Badhippie
      Badhippie replied to the thread Engine sucks but will not blow.
      Why not just put o-rings in place Of the piston rings and see what you get then turning the engine over by hand. Won’t need to fit new...
    • Badhippie
      Badhippie replied to the thread V-TWIN---MAYBE V-4.
      Brian It looks great that was a good work up of the exhaust. Sounds like we may see a running engine in a few weeks Tom
  • Loading…
  • Loading…
Top