lazylathe
Well-Known Member
- Joined
- Aug 27, 2009
- Messages
- 1,285
- Reaction score
- 6
Hi All,
Being my very first build i thought it would have some issues, and it does!
It will run very nicely with air pressure over the flywheel.
It spins freely and does not bind anywhere during the cycle by spinning the flywheel.
When i blow or use higher air pressure it stalls on the downward stroke.
I have tried placing the piston in varying positions but none seem to help.
It did run for a few minutes under breath power but i have not been able to replicate it again.
Any ideas or help would be greatly appreciated!
Andrew
Being my very first build i thought it would have some issues, and it does!
It will run very nicely with air pressure over the flywheel.
It spins freely and does not bind anywhere during the cycle by spinning the flywheel.
When i blow or use higher air pressure it stalls on the downward stroke.
I have tried placing the piston in varying positions but none seem to help.
It did run for a few minutes under breath power but i have not been able to replicate it again.
Any ideas or help would be greatly appreciated!
Andrew