Search results

I have the book by Ron. New condition. email me [email protected]

I'm currently building a George Brittnel 4 cylinder engine and need to have the cam made as I'm not able to do it. I can provide a model in Fusion 360, or just the flat drawing from George. the cam is about 4.5 inches long, and made from 5/16" stock. I can provide the stock. Herb Blair...

I've got a good start on the engine. The front nose is finished, the air cooled cylinder is finished, the cylinder liner is finish. I made a crankcase, but broke off a tap in one hole and a drill bit in another, and wasn't able to them out easily, so I'm re-making the crank case. I'm doing...

I also bought the Model Engineering magazine a few months ago. I have started the engine. So far I've built the Cylinder sleeve, the air cooled cylinder and have started the crank case. My local supplier didn't have 2 1/2" square stock so I bought some 3" square and have whittled it down to...

I didn't realize that you need to insert the collet into the nut first. I tried it and it works great. I'm inserting a MT5 to MT3 adapter, the the MT3 Collet chuck. I'm reading about .0002 run out on the gauge pin. Good enough for the girls that I go out with. ha ha Thanks everybody.

I received a ER-32 collet chuck today, and tried to put a 1/2" collet into the chuck with a 1/2" pin. I could not get the nut to engage. I tried it with the pin out, and it engages OK. Not sure what the problem is. I tried it with other collets and pins and same result...

i agree that the Warner's are first class. I bought a theading tool from them and nothing but good things to say about it.

I also have one, I've had it about a year now. I got the A2Z QC tool post. but if I had it to do over I would buy LMS's shortened compound slide and use a AXA style. I've also taken tbe chip guard off, I plan to put it back on, but with some spacers that will not allow it to interfere with the...

This box was for my son. He doesn't know Machinery's Handbook from Adam. Actually, I thought about this when I was designing my first toolbox. I broke from Gerstner's design in this regard as I wanted the space for tools.

There are only a few pleasures in life better than building your own Gerstner style, quarter sawn White Oak took box. I've built several. As far as tools rusting, NOT A PROBLEM. White oak when dried has about 2% moisture content. On top of that you are going to seal it with a oil finish. If...