Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

S
Reaction score
37

Latest activity Postings About

    • S
      sutty replied to the thread Seeking info.
      Ken, I did note the size of the tubes on the stove site, some of the stoves heaters below the feed pipe and some ran the tube through...
    • S
      sutty replied to the thread Seeking info.
      Cheers Ken, I like the burn from the stoves you put me onto. I'm going to have a go at knocking one up tomorrow a bit like this , the...
      • Screenshot 2022-10-02 at 09.34.13.png
    • S
      sutty replied to the thread Seeking info.
      Cheers Ken, Just got back from a blast on the bike. I've been checking out the Turm stoves, joined the Classiccamp stoves forum, good...
    • S
      sutty replied to the thread Seeking info.
      Ken, yes that’s what I was trying to achieve, I’ve been playing around with the burner today but my design is wrong. There’s no seal...
    • S
      sutty replied to the thread Seeking info.
      Hello guys, a bit farther forward, haven't had time to sort the burner out yet but that's next. The boiler is almost ready to solder...
      • ass 1.jpg
      • ass 2.jpg
      • ass 3.jpg
      • ass 4.jpg
      • ass 5.jpg
    • S
      sutty reacted to Steamchick's post in the thread Seeking info with Like Like.
      Lloyd, I would guess that if you had some horrible brew you wanted to distill for fuel it may be safer to partial distill it by...
    • S
      sutty replied to the thread Seeking info.
      Cheers Ken, I did see a post somewhere where a guy made a burner from a piece of small bore copper pipe, it was bent in a loop at the...
    • S
      sutty replied to the thread Seeking info.
      Yes Ken, makes sense. I watched it for quite a while then i turned the fuel off and took off the top wick plate and vaporiser, the...
    • S
      sutty reacted to Steamchick's post in the thread Seeking info with Like Like.
      Hi Lloyd, That was the ethyl and methyl alcohol mix! Half drinking spirit and half blind poisoning spirit! Hence the term " blind...
    • S
      sutty reacted to Lloyd-ss's post in the thread Seeking info with Like Like.
      Distillation is an interesting process. While in college, we rented a big old farmhouse in Floyd County, Virginia, which is next door to...
    • S
      sutty replied to the thread Seeking info.
      Yes Lloyd, you’re right, the burner I copied had a wick from the bottom reservoir into the top chamber but I couldn’t get that set up to...
    • S
      sutty replied to the thread Seeking info.
      Lloyd, all by itself, I can’t work out if it’s burning the fuel faster than it can get to the bottom tank or if the tubes that the...
    • S
      sutty replied to the thread Seeking info.
      Guys, feel free, We finished the tank and got the burner running, slight mods needed i think it burns well enough but it's flaring...
    • S
      sutty replied to the thread Seeking info.
      Ken, I saw some burners like that on YouTube, they were made from coke cans,
    • S
      sutty replied to the thread Seeking info.
      Hello Ken, that was a valve I put on the vent pipe, I didn't want air coming back along the feed pipe to the burner but it wasn't...
  • Loading…
  • Loading…
Top